elero GmbH Antriebstechnik

Maybachstr. 30
73278 Schlierbach
Germany


Phone: +49 7021 9539-0
Fax: 49 7021 9539-212
E-Mail: info@elero.de

Videos

Presentation video

Silent MotionThe super-quiet motion drives from elero

Silent Motion - The new standard in roller shutter automation.

Operation videos

Free of brake noise!Functioning

Specially quiet, long-lasting and prices

When motorized visibility and sun protection elements reach their intermediate or final position, there is often a loud clicking - to the suffering of the users. To avoid this, elero has been installing the hysteresis brake for more than 90 percent of its drives for roller shutters, blinds and textile sun protections for years. This stops the movement of the curtain completely silently.

Bidirectional RoutingProLine 2

Roller shutters, awnings, roller blinds and Venetian blinds may be controlled more reliably, more capably and in a more transparent manner with ProLine 2, the bidirectional radio control system from elero. At the heart of the technology (868 MHz) are bidirectional transceivers which not only receive signals but can also confirm and transmit these. In addition, radio commands are forwarded to radio receivers which otherwise might be out of range (routing functionality). Another decisive advantage over other radio control systems is the fact that the user can directly see the status of signal processing on the hand-held transmitter. As soon as a command has been performed, it receives a feedback signal and thus always knows what’s happening.

Tutorial videos

The drives and controls from elero combine fast installation with easy commissioning. Optimally matched accessories such as latching couplings, pluggable cables and motor bearings with click system additionally facilitate the installation. Just how simple it can be to program the end positions, the programming of the hand-held transmitter, and how the commissioning of the Centero (1st Generation) System functions are shown in the following videos.

JA Comfort / JA Comfort-868Installation with COM hand-held transmitter

Blind drives with electronic limit switch

The drives are easy to install and equipped with standstill detection and belt length compensation. Thanks to the soft brake, the end positions are approached quietly without clicking noises. 
The drive is also optionally available with integrated ProLine 2 radio receiver.

In this setting video, we explain step by step the entire procedure for setting the end positions and programming using our COM hand-held transmitters.

JA Comfort / JA Comfort-868Installation with setting cable

Blind drives with electronic limit switch

The drives are easy to install and equipped with standstill detection and belt length compensation. Thanks to the soft brake, the end positions are approached quietly without clicking noises. 
The drive is also optionally available with integrated ProLine 2 radio receiver.

In this setting video, we explain step by step the entire procedure for setting the end positions and programming using the elero setting cable.

RolTop - Tubular motor for roller shuttersEnd position setting and transmitter programming

Smooth power for roller shutters

RevoLine roller shutter drives from elero operate the shutters smoothly and with a high degree of precision. The RolTop drives also have an integrated slow-down feature ensuring a smooth travel to the limit stops. This protects the roller shutters and reduces noise significantly.

This commissioning video contains information about setting the end positions as well as programming the hand-held transmitter.

SunTop - Tubular motor for awningsEnd position setting and transmitter programming

Clever technology which impresses

elero awning drives SunTop can be used for open and closed cassette awnings, conservatory awnings, as well as for a wide variety of applications. The intelligent drives automatically adjust themselves to changing ambient conditions. They gently tauten the fabric. Thanks to their learning power curve, an optimum fabric tension is always guaranteed.

In this commissioning video we will explain for you, step by step, the complete procedure for setting the end positions and programming the hand-held transmitter.

Centero (1st generation)Setup and programming

Building automation in just a few easy steps with a smartphone or tablet

These commissioning videos clearly explain the fundamental steps from programming the transmitter sticks up to, and including, installing the Centero System (1st generation).

Information about the current Centero Home Home automation solution can be found here.