Elero offers the appropriate components to enable the convenient integration of standard lamps, radiant heaters, aquarium lighting and much more into your building technology. These devices can then be operated conveniently and reliably by hand-held transmitter or smartphone.
Control the awning from your deck chair or the light and the roller shutters from your bed without having to juggle with lots of different remote controls – the building technology can be operated conveniently by smartphone or tablets with the Yubii Home automation solution from elero.
Elero presents its entire product range as standard with the ProLine 2 bi-directional radio system, which provides a feedback signal and reliability for all transmitted signals. A genuine routing function ensures that the radio signals are transmitted via another radio receiver if the direct path to the electrical drive is not possible, e.g. due to reflecting walls.
You can automate your home very simply with elero. Regardless of whether you use a hand-held radio transmitter or a wall switch, the operation of roller shutters, sun protection, etc. is so simple that you’ll never want to do without it again. Timers and sensors provide for even greater living comfort.
The MonoTel 2 single-channel hand-held radio transmitter can be used both unidirectionally and bidirectionally. In addition it can be used as an individual, group or central transmitter.
Applications: Roller shutters, Sonro roller shutters, Awnings, Blinds and screens, Dual screens, Roller shutters with louvre function, Zip screens, Special applications (90 rpm), Venetian blinds, Light systems, Radiant heaters
Battery-operated radio wall transmitter with 5 individual channels and 1 central channel for operating roller shutters, venetian blinds and awnings. Suitable for standard device deployment 50 x 50 mm.
Applications: Blinds and screens, Roller shutters, Roller shutters with louvre function, Venetian blinds, Awnings, Light systems, Radiant heaters
1-wall transmitter, bidirectional, Radio frequency for reliable transmission, UP-STOP-DOWN/CLOSE Button, Programming button P (on rear), Status LED for displaying system status
Applications: Venetian blinds, Blinds and screens, Roller shutters, Roller shutters with louvre function
The Revio-868 SW is the built-in radio receiver for tubular and venetian blind motors from elero. The receiver can be used for the control of switchable electrical loads with a supply voltage of 230 V AC (e.g. lights).
Applications: Roller shutters, Sonro roller shutters, Awnings, Blinds and screens, Dual screens, Roller shutters with louvre function, Zip screens, Special applications (90 rpm), Venetian blinds, Light systems
This radio receiver is the solution if you wish to operate heating systems using a radio transmitter. The heating system can be switched on and off and to 66% power.
Applications: Radiant heaters
This bidirectional radio receiver is the solution if you wish to operate lighting systems using a radio transmitter.
Applications: Light systems
When browsing through the 250 pages of the elero catalogue, it is easy to find the suitable product with all relevant information. In addition, many interesting facts about the current drive and control unit technology are available.
Are you interested in elero products and want to find a contact person in your country? Here you will find a list of elero representatives and subsidiaries worldwide.
Are you a specialist partner and require detailed information about elero products? Simply contact us.