Shaft mounted rolling door drive - for all types of rolling doors
|
|
Robust drive and versatile control options
The robust elero rolling door drives can be used for all types of doors. The rolling door drives are available in different versions with integrated catching device or as chain drives. All drives are available as 400/230 V models, plug-in connection and with 4 or 6 precise mechanical limit switches. They can be easily mounted on either side of the door.
- maintenance-free, quiet three phase shaft mounted drive with little space requirement on the side
- a range of types with 5 different torques of 170, 250, 350, 500, and 750 Nm for your practical needs
- integrated, actuated by force and maintenance-free catching device
- the catching device is verified according to the TÜV standard and BG certified
- the protection type of the drive unit is IP 54; the protection type of the control is IP 65
|
Shaft mounted
drives for rolling doors with modern design
|
|
versatile applications
- mounting on either side of the door
- all drives are also available with chain drive, transmission ratio of 1:1
- all drive types are available with mechanical or electronic limit switches
Furthermore, you have the choice between 3 different door controllers:
- the modular BoxControl
- the versatile MasterControl
- the gentle SoftControl
The elero rolling door drives, together with the modular BoxControl system, offer a high safety standard and fulfil the requirements of the EN 12453 and EN 12604 standards for type-tested doors.
|
Example of application
|
|
Easy Installation
- the cables of the controller are equipped with connectors, which make it easy to connect it with the motor and disconnect it
|
The modular, electronic door control BoxControl for all DFM and DKM rolling door drives
|
|
the modular BoxControl
- ready-to-use door control with push-button
- 3x 400/230 V 50/60 Hz /24 V DC control voltage
- Plastic housing, protection class IP 66, filament test 650 °C; self-extinguishing; halogen-free
- simple and convenient installation through reduced wiring requirements
- large, installation-friendly connection space for switching devices etc.
- all BoxControl models are certified by VDE and TÜV according to EN 12453; DIN EN 50178 and DIN EN 60204
- subsequent adaptation of the control options possible with the plug-in BoxCard
|
versatile applications through us of the modular BoxCards
|
|
For the BoxControl, the following BoxCards are available:
- basic: Inexpensive door controller with dead man or self-holding, many connections for safety and actuating switches, external evaluation devices and remote control/pull button etc.
- mono: as above, plus direct connection of an optoelectronic closing edge safety device
- plus: as above, plus direct connection of an optoelectronic closing edge safety device or electromechanical closing edge safety device (8,2K .) and slot for the radio module
- pro: as above, plus connection option for garage light and preliminary warning
- comfort: as above, plus automatic closing with red/green traffic light function
- safe: as above, plus connection of wind-up protection at roller grilles
|
Rolling door control MasterControl
|
|
The versatile MasterControl
- robust steel sheet enclosure, protection class IP66
- 3x 400/230 V 50/60 Hz /24 V DC control voltage
- for automatic rolling door or roller grille systems for underground garages with simple traffic light control or oncoming traffic control
- Menu interface in German, English or French
- direct connection of an optoelectronic closing edge safety device or electromechanical closing edge safety device (8,2K .) and slot for the radio module
- direct connection of 2 light barriers for the wind-up protection at roller grilles
|
Rolling door control SoftControl
|
|
The gentle SoftControl
- robust steel sheet enclosure, protection class IP66
- Input: 230 V 50 Hz/24 V DC control voltage
- Output: 3 x 230 V 25 to 100 Hz, adjustable
- for automatic rolling door or roller grille systems with simple traffic light control or oncoming traffic control
- Menu interface in German, English or French
- direct connection of an optoelectronic closing edge safety device or electromechanical closing edge safety device (8,2K .)
- connection of a wind-up protection at roller grilles with additional evaluation device
|
