Technical data roller shutter drives

Type ACS-E ACS 868 NHK STANDART MAX.
TORQUE
 LIFTING
CAPACITY
AT THE SHAFT
 SMALLEST
SHAFT
DIAM.		 SPEED

 VOLTAGE
IN VOLTS
8/05 • - - • 5 Nm 250 N 40 mm 13 Upm 230~
8/08 • • - • 8 Nm 400 N 40 mm 13 Upm 230~
8/1,2 • - - • 12 Nm 600 N 40 mm 8  Upm 230~
9/05 • - - • 5 Nm 200 N 50 mm 14 Upm 230~
9/08 • • • • 8 Nm 320 N 50 mm 14 Upm 230~
9/1/25 • - - • 10 Nm 400 N 50 mm 14 Upm 230~
9/1,3 • - - • 13 Nm 520 N 50 mm 14 Upm 230~
9/2 • • • • 20 Nm 800 N 50 mm 14 Upm 230~
9/2,5 • - • • 25 Nm 1000 N 50 mm 14 Upm 230~
9/3 • • • • 30 Nm 1200 N 50 mm 14 Upm 230~
9/4 • - • • 40 Nm 1600 N 50 mm 14 Upm 230~
9/5 • - • • 50 Nm 2000 N 50 mm 10 Upm 230~
11/4 - - • • 40 Nm 1260 N 63 mm 15 Upm 230~
11/6 - - • • 60 Nm 1890 N 63 mm 12 Upm 230~
11/8 - - • • 80 Nm 2520 N 63 mm 15 Upm 230~
11/10 - - • • 100 Nm 3150 N 63 mm 12 Upm 230~
11/12 • - • • 120 Nm 3800 N 63 mm 12 Upm 230~

110-120V; 210-240V 60Hz/100 V; 200 V 50 Hz on demand
• available; - not available